Private label liquid vitamins
Tampa Bay manufacturing. 2,500L mixing capacity. 25,000 liters per day across five liquid systems.
HBM manufactures private label liquid vitamins in-house at its Tampa Bay liquid facility. The plant runs 2,500L of total mixing capacity across three 500L jacketed vessels and one 1,000L jacketed vessel. Output reaches 25,000 liters per day and 750,000 liters per month. Five systems are available: water-based, oil-based, emulsion, liposomal, and suspension. Five semi-automatic packaging lines cover 3ml to 64oz. One fully automatic line covers 0.5oz to 4oz at 30,000 units per day. MOQ is 3,000 units or 150L. The facility holds 8 certifications including FDA Registration, NSF, USDA Organic, and Non-GMO Project Verified.
Private label liquid vitamins specs
| MOQ | 3,000 units or 150L |
|---|---|
| Mixing capacity | 2,500L total (3 × 500L + 1 × 1,000L jacketed vessels) |
| Production output | 25,000 liters/day, 750,000 liters/month |
| Fill range | 3ml to 64oz across 5 semi-auto lines; 0.5oz to 4oz on 1 fully automatic line |
| Semi-auto throughput | 10,000 units/day per line, 5 lines |
| Fully auto throughput | 30,000 units/day |
| Systems | Water-based, oil-based, emulsion, liposomal, suspension |
| Lead time | Bench 2-4 weeks. Pilot 2-4 weeks. Commercial 4-8 weeks. |
| Certifications | FDA Registration, NSF, Non-GMO Project Verified, USDA Organic, Ecocert, Health Canada, Florida DBPR, Made in USA |
| Facility | Tampa Bay, FL |
What a private label liquid vitamins program at HBM includes
A private label run at HBM covers formulation, mixing, fill, label application, and final release. The buyer arrives with a target SKU. R&D selects the system. Bench samples land in 2-4 weeks. Pilot batch runs in another 2-4 weeks. Commercial production follows in 4-8 weeks. Every stage runs under one quality system and one batch record chain.
System selection: five formats, one facility
HBM runs all five liquid systems in-house. Water-based covers most B vitamins, vitamin C, and soluble minerals. Oil-based handles vitamins A, D, E, K, and omega-3. Emulsion delivers fat-soluble actives in an aqueous-feeling SKU. Liposomal uses phospholipid bilayers for actives like vitamin C, glutathione, and NAD+. Suspension keeps insoluble particles like zinc oxide or calcium carbonate evenly dispersed. The buyer picks the system. R&D locks the spec at pilot.
Mixing capacity and the 150L floor
The plant runs three 500L jacketed vessels plus one 1,000L jacketed vessel. Total mixing capacity is 2,500L. Each vessel uses a high-speed roto-stator and sweeping blades. The roto-stator generates shear for emulsions, liposomes, and suspensions. The sweeping blades prevent thermal hot spots and keep the mix homogeneous. MOQ is 3,000 units or 150L. The 150L floor reflects mixing efficiency. Below 150L the batch is too small for the 500L vessels to mix cleanly.
Fill range and packaging
Five semi-automatic packaging lines run at 10,000 units per day per line. The semi-auto fill range covers 3ml to 64oz. One fully automatic line runs at 30,000 units per day and covers 0.5oz to 4oz. Typical SKU sizes range from 30ml to 946ml. Tinctures, aqueous liquids, syrups, shots, and functional beverages all run on this equipment.
Lead times, held the same across every page
Preliminary estimate lands in 24 hours after the discovery call. Bench samples ship in 2-4 weeks. Pilot batch runs in 2-4 weeks after sample approval. Commercial production runs in 4-8 weeks after pilot approval. These windows match every other lead time published on this site. HBM does not tighten them for a sales angle.
HBM vs most contract manufacturers
| HBM | Most contract manufacturers |
|---|---|
| In-house, Tampa Bay, FL | Routed to a partner facility |
| Five: water, oil, emulsion, liposomal, suspension | Two or three, often outsourced |
| 3ml to 64oz across 5 semi-auto lines | Narrow range tied to one machine type |
| 3,000 units or 150L | 10,000+ units common |
| 8, including USDA Organic, NSF, Non-GMO Project Verified | Varies by partner used |
We run liquids the same way we run gummies. One roof. One quality system. One batch record chain.
William Oliver, Co-founder, HBM
Frequently asked questions
What is the MOQ for private label liquid vitamins at HBM?
HBM's MOQ for private label liquid vitamins is 3,000 units or 150L of mixed liquid. The buyer picks whichever floor works for the SKU. The 150L number reflects mixing efficiency. Below 150L the batch is too small for the 500L vessels to mix cleanly. Liposomal and emulsion runs sometimes warrant a higher floor depending on the spec.
Which liquid systems does HBM run in-house?
HBM runs five liquid systems in-house at the Tampa Bay facility. Water-based, oil-based, emulsion, liposomal, and suspension. Each system uses the same mixing equipment: 2,500L total capacity across three 500L jacketed vessels and one 1,000L jacketed vessel. Each vessel has a high-speed roto-stator and sweeping blades. That equipment handles the shear and temperature control required across all five systems.
What fill sizes can HBM run for liquid supplements private label?
HBM covers 3ml to 64oz across five semi-automatic packaging lines. One fully automatic line handles 0.5oz to 4oz at 30,000 units per day. Typical SKU sizes land between 30ml and 946ml. That range covers tinctures, aqueous liquids, syrups, shots, and functional beverages on the same equipment. The fill spec is locked at pilot batch.
What is the lead time for white label liquid vitamins?
HBM's lead time for white label liquid vitamins runs through four stages. A preliminary estimate lands in 24 hours. Bench samples ship in 2-4 weeks. Pilot batch follows in 2-4 weeks. Commercial production runs in 4-8 weeks. Total time from discovery call to first commercial shipment is roughly 10-18 weeks. The variance depends on system complexity and packaging selection.
Does HBM hold the certifications a private label brand needs?
HBM holds 8 certifications relevant to private label brands. The list includes FDA Registration, NSF, Non-GMO Project Verified, USDA Organic, Ecocert, Health Canada, Florida DBPR, and Made in USA. Each cert applies across the liquid facility and the broader quality system. Buyers selling into the US, Canada, and organic-positioned channels can route through one supplier.
Request a quote.
Send the SKU brief to R&D. Formal preliminary estimate for your private label liquid vitamins program in 24 hours.
Send to R&D