Shot manufacturer supplement programs
Single-serve 2oz to 4oz shots, mixed and filled in-house at HBM's Tampa Bay liquid facility.
HBM runs shot manufacturer supplement programs out of a Tampa Bay, FL liquid facility. Mixing capacity is 2,500L across three 500L vessels and one 1,000L jacketed vessel. The fully automatic packaging line covers a 0.5oz to 4oz fill range at 30,000 units per day. Five semi-automatic lines extend the fill range up to 64oz for larger functional beverage SKUs. MOQ is 3,000 units or 150L. HBM holds 8 certifications including FDA Registration, NSF, and USDA Organic. Most contract manufacturers route shots to a co-packer. HBM mixes and fills shots under one roof.
Shots are concentrated single-serve liquids. The format runs 2oz to 4oz per bottle. Energy, immunity, beauty, hydration, and recovery SKUs all live here. This page covers how HBM manufactures supplement shots:. Which systems fit the format, what fill ranges and bottle sizes the equipment supports, and where shot SKUs run into formulation constraints.
What HBM means by a shot
A shot is a concentrated aqueous or emulsion liquid in a 2oz to 4oz bottle. The dose is one serving. The buyer pours, drinks, and discards. That is the format constraint that drives everything else: flavor masking, preservation, and bottle selection. Shots typically run as water-based or emulsion systems. Water-based covers most energy and immunity SKUs. Emulsion is required when an oil-soluble active needs aqueous delivery in a small fill volume.
Equipment that runs shots at HBM
Mixing happens in jacketed vessels. Three 500L vessels and one 1,000L vessel give 2,500L of total mixing capacity. Each vessel carries a high-speed roto-stator and sweeping blades. The roto-stator drives shear for emulsions. The sweeping blades hold mix homogeneity along the vessel wall. Filling is where shots split from larger liquid SKUs. The fully automatic line covers a 0.5oz to 4oz fill range at 30,000 units per day. That window matches the shot format exactly. Five semi-automatic lines back it up at 10,000 units per day per line across a 3ml to 64oz range.
Fill range, bottle sizes, and MOQ
Most shot SKUs land between 2oz and 4oz. The automatic line covers both. Smaller fills down to 0.5oz also run on the same line for concentrated dropper-style SKUs. MOQ is 3,000 units or 150L of mixed liquid, whichever the buyer prefers. The 150L floor reflects mixing efficiency. Below 150L, the 500L vessels do not mix cleanly. A 2oz shot at 3,000 units lands around 180L, which clears the floor.
Formulation constraints for shots
Bitter actives need flavor masking. NAC, B-complex, and several herbal extracts are common offenders. HBM’s R&D team works the flavor system at bench sample stage so the production SKU drinks cleanly. Preservation matters more in shots than in larger liquids. The fill volume is small. Headspace is small. Options include potassium sorbate, sodium benzoate, ascorbic acid, and label-friendly antioxidants like rosemary extract and mixed tocopherols. The choice is locked at pilot batch. Liposomal SKUs run in the shot format too. HBM’s mixing vessels carry high-speed roto-stators with sweeping blades and support liposomal systems in-house. Encapsulation efficiency is verified per batch.
Lead times from bench to commercial
Bench samples take 2 to 4 weeks. Pilot batch takes 2 to 4 weeks. Commercial production takes 4 to 8 weeks. A formal preliminary estimate ships within 24 hours of the discovery call. The 10-step R&D framework holds across every shot SKU.
Frequently asked questions
What bottle sizes does HBM fill for supplement shots?
HBM fills shot bottles from 0.5oz to 4oz on the fully automatic packaging line. The line runs 30,000 units per day. Most shot SKUs land at 2oz or 3oz. Larger fills up to 64oz move to the semi-automatic lines. The semi-automatic lines run at 10,000 units per day per line. There are 5 semi-automatic lines.
What is the MOQ for a shot manufacturer supplement program at HBM?
HBM's liquid MOQ is 3,000 units or 150L of mixed liquid. The buyer picks whichever option fits. A 2oz shot at 3,000 units works out to roughly 180L. That clears the 150L mixing floor. The floor exists because the 500L vessels do not mix cleanly below that volume. Smaller fills may need higher unit counts to meet 150L.
Can HBM run liposomal shots?
Yes. HBM's mixing vessels carry high-speed roto-stators with sweeping blades and support liposomal systems in-house. Liposomal shots are typically 2oz to 3oz. The fill spec, the carrier system, and the targeted particle size are locked at pilot batch. Encapsulation efficiency is verified per batch. The liposomal format runs through the same automatic line used for standard shots.
How long does it take HBM to launch a new shot SKU?
HBM ships a formal preliminary estimate within 24 hours. Bench samples take 2 to 4 weeks. Pilot batch takes another 2 to 4 weeks. Commercial production runs in 4 to 8 weeks. End-to-end the path is roughly 8 to 16 weeks. The variance depends on flavor work, preservation system, and packaging lead times.
What certifications does HBM hold for shot manufacturing?
HBM holds 8 certifications. The list includes FDA Registration, NSF, Non-GMO Project Verified, USDA Organic, Ecocert, Health Canada, Florida DBPR, and Made in USA. Shot SKUs can route through any of these depending on label claims. Organic certification requires organic-compliant ingredients and segregated production. The R&D team flags certification fit at bench sample stage.
Related pages
Talk to R&D about your shot SKU.
Formal preliminary estimate within 24 hours of the discovery call.
Talk to R&D